Gold Plating Over Silver Jewellery Mini Tank Plating Saver Pack
£133.80
(Excl. tax)
SKU:
GOLD-SAVER
Value pack for plating silver jewellery in 24k gold.
Includes G.S.P 24K Gold Plating Solution 100ml, G.S.P Palladium Plating Solution 100ml, G.S.P Electrocleaner 250ml
There are a few special considerations when plating silver jewellery in gold.
Silver has a tendency to cause migration of the top coat. This means that over time, the 24k gold plated finish will sink into the silver base metal causing discolouration. To avoid this, a thin layer of Palladium Plating Solution should be applied before plating the gold, this creates a barrier and stops migration, leaving you with the perfect plated finish!
Nickel ( which is usually used in barrier plating ) cannot be used when plating jewellery as it causes allergic reactions, palladium is a perfectly safe alternative and is permitted in EU law for the plating of jewellery.
This value pack offers a lower-cost way of purchasing the essential chemicals needed for gold plating silver jewellery – we have included 100ml volumes of the plating chemicals to save jewellers buying bulk amounts in one go. Buying this pack represents a 5% saving versus buying each solution separately.
250ml Electrocleaner is included to ensure that your jewellery pieces come out with a flawless finish.
Please note: these solutions are pre-made, cannot be diluted and are intended for use in small plating pots (mini-tanking) where rings. earrings and other small accessories are plated individually or in very small batches dependent on surface area. You will require a suitable plating machine to use the plating solutions and the correct type of anodes - please enquire for details. For plating multiple pieces of jewellery in one go or for plating items larger than rings, larger tanks and larger volumes of each solution are required.
All of our gold plating solutions contain ethically mined gold, more information can be provided upon request.
(Photo shows 1 litre of plating solutions for illustrative purposes, in this value pack you will be supplied 100ml 24k Gold Plating Solution, 100ml Palladium Plating Solution and 250ml Electrocleaner).
Contents Listing
G.S.P 24K Gold Plating Solution 100ml
G.S.P Palladium Plating Solution 100ml
G.S.P Electrocleaner 250ml
Overview of use
Instructions for use of:
G.S.P 24K Gold Plating Solution
Pen plating:
9 volts
Brush plating:
6 volts
Tank plating:
0.01 amps per cm2
Additional notes:
When tank plating, sway item gently but continuously to avoid cloudy plating. Alternatively, use air agitation under the item that is being plated.
When brush plating, probe must be moved quickly, no slower than 3 swipes per second.
Instructions for use of:
G.S.P Palladium Plating Solution
Pen plating:
4 volts
Brush plating:
4 volts
Tank plating:
0.01 amps per cm2
Additional notes:
Use as a barrier plate when plating jewellery
Tank plate for 40 seconds for a sufficient barrier plate.
Instructions for use of:
G.S.P Electrocleaner
Pen plating:
6 volts
Brush plating:
6 volts
Tank plating:
6 volts or 8 amps (whichever comes first)
Additional notes:
Electroclean for 3 minutes then check that the item passes the water-break test.
Related products
We Accept
