G.S.P 18K Gold Plating Solution
Our G.S.P 18K Gold Plating Solution produces a slightly lighter tone of yellow and a harder wearing surface, which is a common request for plating on jewellery. It can be tank, brush, and pen plated and contains 4 grams of gold per litre. It can be plated to a vermeil thickness of 2.5 microns and produces a hard-wearing, long-lasting plate.
Thie main use of this solution is to act as a flash gold strike over stainless and non stainless steels, to allow for easy and full adhesion of 24K Gold.
For optimum performance, use with our G.S.P Brush Plating Probes or 316 Stainless Steel Flat Tank Plating Anodes.
(Image shows 1L bottle)
Overview of use
Instructions for use of: G.S.P 18K Gold Plating Solution
Pen plating: 6 volts
Brush plating: 3-9 volts
Tank plating: 0.01 amps per cm2
Used as a pre-plate over all types of steels when tank plating. With non stainless steels, it seals and prevents formation of rust under the plating when followed by a nickel plate.
Brush plating at 3-9 volts can affect the shade - a higher voltage leads to a lighter shade. When brush plating, probe must be moved quickly, no slower than 3 swipes per second.
When tank plating, sway item continuously or use air agitation directly under the item that is being plated.
18K gold plating solution which plates to a lighter tone than 24K gold.
Strike for plating over steels / decorative finish.
Does it require heating?
Is it suitable for use with G.S.P Brush Plating Probes?
How much coverage per litre?
1966cm2 per litre (based on 1 micron thickness)
Part of Mirror Tech System?
Also used as a flash for tank plating over stainless steel.
This chemical is classed as hazardous, always wear appropriate personal protective equipment (PPE) and ensure that you read and follow the SDS sheet supplied for details on how to stay safe.