Nickel Anode

Instructions for use:

Your nickel anode comes pre-threaded on titanium wire and in an anode bag. The bag sits on the inside wall of the tank and your red plating lead (positive) with crocodile clip, bites onto the protruding titanium wire. For deeper tanks, you can use plastic clips to hold the anode bag in place so that it does not touch the floor of the tank. Always ensure that the water line never goes above the bag opening.

These anodes are sacrificial, meaning that they will slowly dissolve through use. When the anodes become sufficiently depleted, they will need replacing.

If you wish to clean the anode bags, take care in removing from the tank to ensure that none of the contents spill out into your solution. Rinse the bags gently in de-ionised water.

Once an anode bag has been used in the nickel solution, it cannot be used in any other type of solution.