G.S.P Nickel Activator Solution

Overview of use:
Instructions for use of:

G.S.P Nickel Activator

Pen plating:

7.5 volts

Brush plating:

7.5 volts

Tank plating:

7.5 volts or 8 amps (whichever comes first)

Additional notes:

When brush plating, each section of the surface of an item requires just 1 or 2 passes. You must be sure not to miss any areas, as this will prevent the subsequent plate from adhering properly.

Tank plate for 40 seconds for complete activation. Follow this with 1 minute of electrocleaning in all cases.

 

Technical Specs:
Name

G.S.P Nickel Activator Solution

Description: 

Plating prep chemical.

Use:

Used on nickel surfaces to allow subsequent plating.

Plating modes?

Pen, brush, tank

Does it require heating?

No

Is it suitable for use with G.S.P Brush Plating Probes?

Yes

How much coverage per litre?

N/A

Part of Mirror Tech System?

No

Additional information:

If a nickel surface is freshly tank plated and the next plating step will also be followed immediately by tank, nickel activator step is not required.

Safety information:

This chemical is classed as hazardous, always wear appropriate personal protective equipment (PPE) and ensure that you read and follow the Safety Data Sheets supplied for details on how to stay safe.

 

Our G.S.P Nickel Activator is required when plating over a nickel surface, as it will remove the trace elements of oxide that build up on nickel and prevent plating. Importantly, if you intend to plate over a chrome item, nickel activator is essential, as nickel is the surface you will be plating onto once the chrome has been stripped. It can be used for brush, tank, and pen plating.

We also recommend using our Nickel Activator when plating over yellow gold jewellery. This could be because you are replating it or because you are plating over the gold with a different finish. Sometimes yellow gold jewellery contains nickel, this is especially the case with older pieces of jewellery, and the nickel will need to be activated in order to plate on top. If your yellow gold does not contain nickel, using the activator will cause no harm. So, unless there is certainty of no nickel present, it is generally a good idea to use it anyway just in case.

 

For optimum performance, use with our G.S.P Brush Plating Probes or 316 Stainless Steel Flat Tank Plating Anodes.

Please note: this is not a single use solution. As with all our solutions, it is designed to be used again and again.

(Image shows 5L bottle)

G.S.P Nickel Activator, 5 litre bottle
SKU NIC-ACT
£17.99
(Excl. tax)
* Bottle Size:



We Accept

Visa, Mastercard, Discover, American ExpressPayPal

Image

Suppliers of electroplating and electroforming kits and chemicals. Large range of tank, brush, pen plating kits, precious metal finishes and plating accessories.

Contact Us

Address:
Gold Solutions Plating
Unit 3, Pier Road Ind. Estate
Pier Approach Road
GILLINGHAM
Kent  ME7 1RZ

Phone: 01634 788385

Email: enquiries@gsplating.co.uk